Roofing dumpster questions
What size dumpster do I need for a roof tear-off?
Weight decides it, not volume. Most single-layer asphalt roofs land in a 15 yard; double layers and bigger roofs step up to the 20. Slate and tile are a phone call, because at 800 to 1,000 pounds a square the dumpster has to be sized to the tonnage.
How heavy are shingles per square?
Three-tab asphalt runs about 230 to 250 pounds a square, architectural about 400 to 430, and slate or tile 800 to 1,000. A square covers 100 square feet, and a steep roof adds roughly 20 percent once underlayment, flashing, and nails come off with it.
What does a roofing dumpster cost in Toledo?
The same flat rates as every dumpster we run: $370 for the 15 yard, $420 for the 20, with delivery, pickup, and 10 days included. Shingle loads can pass the weight allowance, so we talk the tonnage through when you book; anything over runs about $60 a ton, agreed before the truck rolls.
Can you drop the dumpster before tear-off starts?
Yes, that's the normal rhythm. Order about a week ahead with the jobsite and start date and the dumpster is sitting where the crew wants it before the first shingle comes off. If it fills mid-job, we swap the full dumpster for an empty one so the tear-off never stalls.
Do two layers of shingles need a bigger dumpster?
Usually one size bigger, sometimes a planned swap instead. Two layers roughly doubles the tonnage, and the right play depends on the roof size. Give us squares and layers on the phone, or run them through the size calculator, and we'll call it straight.
How many squares of shingles fit in a dumpster?
Work it in tonnage rather than squares, because that's what actually fills the dumpster. Multiply your squares by the weight per square: a 25-square roof in three-tab asphalt at 240 pounds runs about 6,000 pounds, or three tons. The same roof in architectural shingle at 415 pounds is closer to 5.2 tons, which is a different size. Give us the squares and the shingle type and we'll name the size against its weight allowance on the call.
Is there a roofing dumpster calculator?
The size calculator covers general debris, and for a roof the faster route is the table above plus one phone call. Squares times weight per square gives the tonnage, and the tonnage picks the dumpster. It takes about a minute on the phone and it's the number that decides whether your invoice matches your bid.